Unit Conversion Calculator

Unit conversions for: Temperature, Angle, Length, Area, Volume, Mass, Force, Pressure, Time, Velocity, Acceleration, Volumetric Flowrate, Mass Density, Weight Density, Mass Flow, Energy, Power, Viscosity

To:  LMNO Engineering home page 
Gas flow conversions   Register   Trouble viewing or printing?
Comments/Suggestions? Please contact us at LMNO@LMNOeng.com  or by phone at  +1 (740) 592-1890

Register to fully enable "Calculate" button.  For non-registered users of this page, only Temperature, Angle, and Length conversions are enabled.

Your browser does not support Java, or Java is disabled in your browser. Calculation should be here.

Notes 
The acceleration of gravity, 9.8066 m/s2, is used to convert between mass and force.
Pound(mass) and pound(force) have identical numerical values.  We list both units because many people are used to using one or the other and like to see them listed separately.
The BTU and calorie units are thermochemical values.

Abbreviations used in our calculator:
bbl=barrel, BTU=British thermal unit, cm=centimeter, ft=foot, km=kilometer, kW=kiloWatt, lb=pound, lb(f)=pound(force), lb(m)=pound(mass), m=meter, Mcf=million cubic feet, mg=milligram, MGD=million gallons per day, mm=millimeter, MPa=Mega Pascal, min=minute, N=newton, s=sec=second, UK=United Kingdom (used for gallons), US=United States (used for gallons and some other units), yr=year

LMNO Engineering wrote the computer program in Java using double precision so that the maximum amount of decimal places in the unit conversions could be used.  We used the maximum amount of significant figures for each unit.  For instance, Munson et al. (1998) provides a unit conversion of 1 bushel(US)=0.03523907016688 meter3.   We used all of the digits in the program.

References 
Bear, J.  1979.  Hydraulics of Groundwater.  McGraw-Hill Pub Co.

Munson, B.R., D. F. Young, and T. H. Okiishi.  1998.  Fundamentals of Fluid Mechanics.  John Wiley and Sons, Inc.  3ed.  (This is the best reference for fluid mechanics unit conversions.  It indicates which unit conversions are exact by definition and which are approximate - there are some units in existence that cannot be exactly converted from one unit to another.  For the non-exact conversions, it provides on the order of 10 significant digits for each unit.)

Perry, R. H. and D. W. Green.  1984.  Perry's Chemical Engineers' Handbook   McGraw-Hill, Inc.  6ed.


©1998- 2001 LMNO Engineering, Research, and Software, Ltd. (All Rights Reserved)

LMNO Engineering, Research, and Software, Ltd.
7860 Angel Ridge Rd.   Athens, Ohio  45701   USA   +1 (740) 592-1890
LMNO@LMNOeng.com    http://www.LMNOeng.com